How To Drain and Clean Your Hot Tub Properly - Peterborough, Ontario

How To Drain and Clean Your Hot Tub Properly
October 15/2023

Draining and cleaning your hot tub on a regular basis is essential to maintain its cleanliness, prevent the buildup of bacteria, and extend its lifespan. Here's a step-by-step guide on how to drain and clean your hot tub properly:

Read the manufacturer's instructions: Before you begin the draining and cleaning process, familiarize yourself with the specific guidelines and recommendations provided by the hot tub manufacturer. This will ensure that you follow the correct procedures for your particular model.



Turn off the power: Before draining the hot tub, make sure to turn off the power supply at the circuit breaker. This will prevent any potential electrical accidents during the cleaning process.

Drain the water: Locate the drain valve on your hot tub. It is usually located near the bottom of the tub. Attach a garden hose to the valve and direct the other end to an appropriate drainage area, such as a floor drain or your backyard. Open the valve and allow the water to drain completely. Keep in mind that hot tub water contains chemicals, so ensure that the water drains safely without causing harm to the environment.

Clean the shell: Once the tub is drained, use a mild non-abrasive cleaner specifically designed for hot tubs and a soft cloth or sponge to clean the interior shell of the hot tub. Avoid using harsh chemicals, as they can damage the surface. Pay attention to the waterline and any areas with visible dirt or debris. Rinse thoroughly with water to remove any residue.

Clean the filters: Remove the hot tub filters according to the manufacturer's instructions. Rinse them with a hose to remove loose debris. To deep clean the filters, you can soak them in a filter cleaning solution recommended by the manufacturer. Follow the instructions provided with the cleaning solution, as soaking times may vary. Rinse the filters thoroughly and allow them to dry before reinstalling.

Inspect and clean the jets: Take a close look at the jets in your hot tub. If you notice any mineral deposits or buildup, you can use a specialized jet cleaner or a mixture of white vinegar and water to clean them. Follow the manufacturer's instructions for cleaning the jets, as the process may differ depending on the type of jets in your hot tub.

Refill the tub: Once the hot tub is clean and all the components are dry, you can refill it with fresh water. Ensure that the water source is clean and free from contaminants. Use a hose filter or pre-filter if necessary to remove impurities from the water.

Balance the water: After refilling the hot tub, test the water using a water testing kit. Adjust the pH, alkalinity, and sanitizer levels according to the manufacturer's recommendations to ensure the water is balanced and safe.

Restart the system: Once the water is properly balanced, you can turn on the power supply and restart the hot tub's filtration and heating system. Allow the water to circulate for a while to ensure proper mixing of the chemicals.

Regular maintenance: Follow a routine maintenance schedule recommended by the manufacturer, which may include tasks like regular water testing, filter cleaning or replacement, and adding necessary chemicals to maintain water quality.

Remember to consult the specific instructions provided by your hot tub manufacturer, as the cleaning and maintenance procedures may vary slightly. Regularly cleaning and maintaining your hot tub will not only help keep it hygienic but also ensure optimal performance and extend its lifespan.



   





First Name
e-mail
(will not be published)
Phone
(optional - will not be published)

Comment


Enter above value to submit form
used to stop form spam

I approve Water World Pools to send me correspondence through email regarding their promotions, products & services




Comments

No Comments at this time!

Go to top of page